Pintesint commercializes a series of aluminum in paste and gold and copper powder, to be mixed with BARNIZ BRONCE (BRONZE VARNISH) and thus achieve metallic colours.

The percentage of mixing depends on the desired color and the fabric used; But between 15 and 25% pigment is recommended. Mix both to ensure no lumps.

The ink already mixed with pigment decreases in stability so it is recommended to mix only the amount needed for the job.

If you need to reduce the viscosity, you can use VINYL REDUCER (9602) or VINYL RETARDER (9604). Available pigments are:

4507 ALUMINUM IN PASTE SUPER FINO is a gray aluminum with great covering power.

4508 ALUMINIO ST SILVER is a silver aluminum for use in front prints.

4510 ORO RICO is a gold colored powder.

4511 ORO RICO PALIDO is a little more reddish than rich gold.

4514 COBRE copper powder.

4518 SPECIAL ALUMINUM 38.2 is a 60 micron pigment for effect.

4519 SPECIAL ALUMINUM 3900 is a 30 micron pigment for effect.

Important note

I. The inks formulated by Pintesint SAICyF must be used exclusively with the solvents and the complementary products that it manufactures for that purpose. Due to the diversity of products in the market, the company is not responsible for the use of the same from another source.
II. The suggestions and data of this literature were elaborated in good faith, to guide the user. We recall the importance of checking the adaptability of inks and complementary products by testing before starting production. Due to the fact that the conditions of use of the products are not under our control, the present does not constitute a guarantee on the work to be done.