Just as the EMULQUIT GEL is used to remove the photographic emulsions of the paintings, with the particularity of allowing, the washing of several matrices at the same time, by immersion. It is soluble in water and white.

Preparation / Mix

Dilute 100 grs. Of the product in 5 to 10 liters of water, depending on the concentration to be sought.

Mode of Use

It is applied by rubbing or by immersion on the dry mesh, allowing it to act for a few minutes, then washing with water under pressure. Do not allow the product to dry on the mesh, because it may become blocked.

Storage and Packaging

Keep container tightly closed and dry. Away from combustible material. In the conditions mentioned it remains unalterable.

Important note

I. The inks formulated by Pintesint SAICyF must be used exclusively with the solvents and the complementary products that it manufactures for that purpose. Due to the diversity of products in the market, the company is not responsible for the use of the same from another source.
II. The suggestions and data of this literature were elaborated in good faith, to guide the user. We recall the importance of checking the adaptability of inks and complementary products by testing before starting production. Due to the fact that the conditions of use of the products are not under our control, the present does not constitute a guarantee on the work to be done.