It is a fast curing ink, high gloss and an ideal viscosity for its correct definition. It has been specially developed for the printing of treated polyethylene and polypropylene containers.

With a line of colours of good resistance to the outdoor environments in which the polychromatic tones are included.

Auxiliaries

Polychromatic concentrates: They are pigment concentrates to raise the tones of the inks. They modify the speed of curing, so it is recommended not to add more than 5% and confirm curing and adhesion.
BUV024 Yellow
BUV025 Medium Yellow
BUV054 Magenta
BUV056 Magenta NRL
BUV074 Cyan
BUV090 Black
Curing accelerator 11042: It is recommended to add 1 to 5% if necessary.
Reducer of non-active viscosity 11047: An excess can modify the characteristics of the ink, not add more than 5%.

General Recommendation

Do not mix this line of inks with any product not recommended in the previous point (AUXILIARES)

Curing: The curing rate depends on the following factors, lamp status, film thickness and color. Check these points before adding curing accelerator.

Pre-printing tests: Check the characteristics of the substrates before use, checking the adhesion of the ink.

Deficiencies during the curing: If poor curing is obtained with any of the colours, shown through wet film or loss of gloss, it is usually due to an excessive ink tank. To correct this, factors such as mesh, manigueta rubber, color density, band speed or amount of UV energy must be modified.

Storage: Store in a place protected from light and in black polyethylene containers, because exposure to light causes the polymerization of the ink. The containers should be closed very well, and immediately after using the inks.
To maximize shelf life, the storage temperature should be 10 ° C to 25 ° C.
The stability of the ink is one year, fulfilling the mentioned requirements.

Safety: Contact with skin causes irritation, in this case wash with plenty of soap and water. Wear gloves and eye protection. Change contaminated clothing and consult a physician.

Important note

I. The inks formulated by Pintesint SAICyF must be used exclusively with the solvents and the complementary products that it manufactures for that purpose. Due to the diversity of products in the market, the company is not responsible for the use of the same from another source.
II. The suggestions and data of this literature were elaborated in good faith, to guide the user. We recall the importance of checking the adaptability of inks and complementary products by testing before starting production. Due to the fact that the conditions of use of the products are not under our control, the present does not constitute a guarantee on the work to be done.