Product to eliminate stains produced by diazo, bichromate or inks (including epoxies and UV) in fabrics for screen printing.

Caution

The product is corrosive, not to mix with any other product nor to apply on fabrics that have remains of caustics, detergents, etc.

Mode of Use

Apply the pure product on both sides with a brush of synthetic bristles, sponges or cloth (wear protective gloves), then wait at least 3 minutes and then wash with water. In case of rest, repeat the operation.

Important

In case of corrosive product take precautions as to safety (glasses, gloves), in case of splashes, wash immediately with plenty of water. DO NOT MIX WITH SOLVENTS, USE THE PURE PRODUCT.

Reminder

Do not use on nylon fabrics.

It acts better and faster, if after applied the shablon is placed in oven to no more than 40 degrees for 5 to 10 inutos.

Important note

I. The inks formulated by Pintesint SAICyF must be used exclusively with the solvents and the complementary products that it manufactures for that purpose. Due to the diversity of products in the market, the company is not responsible for the use of the same from another source.
II. The suggestions and data of this literature were elaborated in good faith, to guide the user. We recall the importance of checking the adaptability of inks and complementary products by testing before starting production. Due to the fact that the conditions of use of the products are not under our control, the present does not constitute a guarantee on the work to be done.