It is an ink specially developed for the production of labels for transfer by means of an aerosol adhesive on molds for rotomolding.

Shablon

Mesh 77 - 120 threads. Voltage 20 Newtons.

Emulsion

High definition emulsion with two passes wet on wet per side.

Squeegee Rubber

Hardness 75 - 80 Shores. Right angle. Inclination of attack: 75 °.

Performance

Depending on the mesh used, approx. 40 m².

Drying time

24 hours in the air. Do not force heat dried. Keep humidity and room temperature controlled. (20 ° C and 50-70% humidity).

Diluent

Mineral turpentine.

Retardant

Retardant 140. Cod. 9140.

Support paper

Siliconized paper.

Important note

I. The inks formulated by Pintesint SAICyF must be used exclusively with the solvents and the complementary products that it manufactures for that purpose. Due to the diversity of products in the market, the company is not responsible for the use of the same from another source.
II. The suggestions and data of this literature were elaborated in good faith, to guide the user. We recall the importance of checking the adaptability of inks and complementary products by testing before starting production. Due to the fact that the conditions of use of the products are not under our control, the present does not constitute a guarantee on the work to be done.