High quality and high intensity inks, drying by ultraviolet radiation, for printing by flexographic system. Suitable for a wide variety of substrates.

Auxiliaries

• Multipurpose use.
• Excellent fluidity adapts to practically all types of printing machines. Good adherence on recommended substrates and good physical and chemical resistance.

General Recommendations

Curing: This line of inks is formulated for speeds of up to 100 m / min. The speed of printing depends not only on the lamps but also on the color, the ink layer and the ink coverage. Generally dark colours, black, opaque white and metallic inks dry out more slowly than yellow, red or varnishes.

Storage: Store in a place protected from light and in black polyethylene containers, because exposure to light causes the polymerization of the ink.
The containers should be closed very well, and immediately after using the inks.
To maximize shelf life, the storage temperature should be 10 ° C to 25 ° C.
The stability of the ink is one year, fulfilling the mentioned requirements.

Safety: Contact with skin may cause irritation, in this case wash with plenty of water and soap.
Wear gloves and eye protection.
Change contaminated clothing and consult a physician.

Comments: We always recommend to perform preliminary tests to determine the suitability of the inputs and processes.
Our technical department is available to answer your questions.

Important note

I. The inks formulated by Pintesint SAICyF must be used exclusively with the solvents and the complementary products that it manufactures for that purpose. Due to the diversity of products in the market, the company is not responsible for the use of the same from another source.
II. The suggestions and data of this literature were elaborated in good faith, to guide the user. We recall the importance of checking the adaptability of inks and complementary products by testing before starting production. Due to the fact that the conditions of use of the products are not under our control, the present does not constitute a guarantee on the work to be done.